Accessories
Terry Tools accessories are produced entirely in the USA using the highest-quality materials available.
Terry Brass Drill Adapters
| Type | Part # | Thread Size | Drill Size |
|---|---|---|---|
| Terry Solder Type (Short) | A / B / C | 5/16-24 / 1/4-28 / 10-32 | #11–#50 / #28–#50 / #36–#50 |
| Terry Solder Type (Long) | LA / LB / LC | 5/16-24 / 1/4-28 / 10-32 | "E"–#50 / "E"–#50 / #11–#50 |
| Terry Set-Screw Type | A-S / B-S / C-S | 5/16-24 / 1/4-28 / 10-32 | "E"–#50 / "E"–#50 / #11–#50 |
Terry Brass Drill Adapters are available undrilled (solid), drilled to order, or tapped to order.
Ritmar Midget Chucks
Ritmar Midget Chucks are a two-piece unit designed to firmly hold regular drills, available by special order only. While most are available only in the round-hole style, some are available with the broached-hole design to hold broken drills. These chucks are not adjustable. Please specify drill size needed when ordering.
| Type | Available Drill Sizes | Available Thread Sizes |
|---|---|---|
| "200" | #6–#50 | 10-32, 1/4-28, 5/16-24 |
| "300" | "F"–#5 | 1/4-28, 5/16-24 |
Terry Countersinks
Terry Countersink Cutters were designed to be used with all our 10-32 threaded spindle tools.
- 3/8" x 60°
- 3/8" x 78°
- 3/8" x 82°
- 3/8" x 90°
- 3/8" x 100°
- 3/8" x 120°
- 1/2" x 82°
- 1/2" x 90°
- 1/2" x 100°
Terry Chuck Adapters
With the Terry Chuck Adapter, threaded spindle tools can be modified to accommodate the Jacobs 5/32" or 1/4" capacity chuck.
- Adapters for the 5/32" chuck are available for the 1/4-28 or 5/16-24 threaded spindles.
- Adapters for the 1/4" chuck are only available for the 5/16-24 threaded spindle.
- No chuck adapters are available for the 10-32 threaded spindle.
